top of page
2DualCDC wix2.jpg
2DualCDC wix1.jpg

The OEAudio Brand New 2Dual Series 

2DualCDC

Concentric Duplex Annealing OFC

C

D

C

Concentric-Lay

Duplex Annealing

Oxygen-free Copper

Made in Germany

Oxygen-Free-Copper

Duplex Annealing Process 

Concentric-Lay Structure

Slim & Soft

with a total of 148 strands. 

· Various connector plans, for MMCX and 2Pin earphones.

· 37*0.06mm Oxygen-Free-Copper Strands in each cord,

Concentric Stranded Conductors are constructed with a central core wire, surrounded by one or more layers of helically laid wires with each successive layer alternating in direction or uni-directional.

· Why do we Name the Cable 2DualCDC

2Dual represents the structure of the cable. The conductors are Teflon coated and accurately twisted, and covered with medical grade TPU sheath, then twisted again. 
This structure has the advantage of 1. Effectively shielding interference from both internal and external electrical signals. 2. Preventing the conductors from being oxidated 3. Providing an experience of comfort, good looking, and soft. 

C stands for Concentric-Lay Structure

To eliminate the negative effect of the current magnetic effect, OEAudio utilized the Concentric-Lay Structure into the new 2Dual Series. 

2DualCDC wix3.jpg

To eliminate the negative effect of the current magnetic effect, OEAudio utilized the Concentric-Lay Structure into the new 2Dual Series. 

The regular pattern of the Concentric-Lay structure eliminates the negative effects such as loss of signals jumping inside out the cable through various conductors. 

Unlike ordinary structures which cross-section of the conductor seems more like non-regular patterns which cause signal accumulation in some spots which negatively affect the high-frequency response of the cable. The cross-section of the Concentric-Lay conductors is closer to a circle, which signals are more evenly distributed across the outer layer, providing a bigger area for the signals to pass through, resulting in more stable highs. 

The distribution of the conductors is even and uniform. The internal structure of the cable will not easily be disorganized even being affected by external forces (such as bending)

This process gives us soft conductors with more excellent conductivity.

D Duplex Annealing

The Duplex annealing process is done after the primary annealing process in a vacuum environment.  The conductors are heated to a temperature at which metal crystals can be formed. The conductors are then cooled down slowly to room temperature, which the time-controlled cooling process eliminates stresses of the crystals and more balanced crystals are formed.

C Oxygen-free Copper

Nexans' OFC is used in the 2DualCDC cable production, which inpurities are controlled in less than 8PPM(*1PPM). We remove the polluted surface of the copper sticks before peeling, and surfaced are polished to a micrometer-grade smoothness. 101.3% of IACS(a conductivity standard) is achieved. 

Before the conductors are extended, they are peeled. Our customized natural diamond peeling-die ensures the smoothness of the surface of the conductors which eliminates loss of the high-frequency signals. Impurities are peeled off the conductors leaving a smooth surface.

2DualCDC wix4.jpg

Both the sound performance, and the process, are significantly improved

Transparency-

The brand new 2Dual Series has a sound signature of Transparency. The robust and transparent sound is achieved by significantly eliminating crosstalk between cords and losses of high-frequency signals. 

Smoothness-

Thanks to the conductor manufacturing processes, the 2DualCDC has a smooth and tranquil sound, gentle and non-stimulating in all frequency-bands. It is suitable for long-term audition.

Isotacticity-

Excellent Dialectic materials as well as the twisted structure reduce phase shifts. Isolations between channels are improved, which sound stages are more regulated and positioning of sound is improved. 

Audio grade materials, internal and external 3U Gold Plated 

Original Lightning Plug- We use the original Lightning C100 connector

cirrus logic.png

The latest Type-C chip is integrated into the Type-C version, the

                           CS46L61 chip has an SNR of 121db, with a -98dB THD+N, supporting up to 384KHz/32bit formats, having an output of 0.95mV@32ohm.

Connectors

2DualCDC wix5.jpg

The connectors are from the OEAudio supply chain.

Double injection molding technology is used in the connectors, has better quality than hand-soldered connectors.

A soft plastic slider spilt in the middle of the cable.​​

Earhook-free design, multiple ways of connecting to your earphone.

Customized Oyaide Solder, 4.7% silver contained. Cables are soldered with low-temperature equipment which enhances the sound performance down to every simple detail.

Photos

2DualCDC wix6.jpg
bottom of page